WN-1300H(C) / 1500H(C) Extra Long Hand Type Impulse Sealer-with Cutter
WN-1300H(C) / 1500H(C) Extra Long Hand Type Impulse Sealer-with Cutter - With Cutter
WN-1300H(C) / 1500H(C) Extra Long Hand Type Impulse Sealer-with Cutter
WN-1300H(C) / 1500H(C) Extra Long Hand Type Impulse Sealer-with Cutter - With Cutter

Extra Long Hand Type Impulse Sealer-with Cutter

WN-1300H(C) / 1500H(C) Series

WU-HSING’s Extra Extra Long Hand sealer (WN-1300H, WN-1500H) offers a long bar and short distance from the working table.
Impulse sealing with electronic control. It is Suitable : PE, PP, OPP, PVC, POF …plastic materials.

Operation: After set up its sealing time, put the object on the sealing bar, press Upper lever down by 2 hands once and same time. Lamp goes off, wait for 4-5 sec.
(Congealing time), just lift the Upper Lever. Sealing is finished.

Caution: Because it is extra long bar, must be one hand on middle Handle of long bar, one hand on Handle Knob. Press it down by 2 hands in the same time.
(If 2 hands not pressing in the same time, the sealing won’t be good.)

  • Sealing width: 2.7mm, 5mm.
  • 0.8mm for sealing & cut.
  • Optional: Sliding Cutter (bag edge: about 17mm).

Specification

Model  WN-1300H WN-1500H
Voltage 110V/220V 110V/220V
Power (watt.) 2000W 2500W
Max. sealing  1300 *2.7mm 1500 *2.7mm
Heating Time 0-1.5 sec. 0-1.5 sec.
Max. Temp. 250 ℃ 250 ℃
Dimension 157*13*32cm 189.5*24*35cm
Weight 16KGS 37 KG

Model  WN-1300HC WN-1500HC
Voltage 110V/220V 110V/220V
Power (watt.) 2000W 2500W
Max. sealing  1300 *2.7mm 1500 *2.7mm
Heating Time 0-1.5 sec. 0-1.5 sec.
Max. Temp. 250 ℃ 250 ℃
Dimension 157*13*32cm 189.5*24*35cm
Weight 17KGS 38 KG

Products